Subpage of Base setup menu

Adjustable Fuel Cut

• Adjustable Fuel Cut is an RPM limiter tool which has partial fuel cut option (not recomended), and time delay option.
• Partial fuelcut on high load can be dangerous.
• Partial fuelcut can use only below 99% injector duty cycle.
• Operation:
  • Under Low RPM limit: no fuel cut.
  • Between Low and High RPM limit:
    • before Low time limit: no fuel cut.
    • after time limit elapsed from reaching RPM limit: Low cut and Low fuel enrichment
  • Above High RPM limit:
    • before High time limit: no fuel cut.
    • after time limit elapsed from reaching RPM limit: High cut and High fuel enrichment
  • Normally:
    • High RPM limit is higher than Low RPM limit,
    • High time limit is lower the Low time limit,
    • High Cut is higher than Low cut.
• Disabling:
  • Set the High and Low rpm limits to the maximum (16320 RPM).
• Limittations:
  • Partial fuelcut idle control can't used with this tool at the same time.
  • For more details check here.
• Advanced options:
  • The RPM limits are trimmable with Anytrim control,
  • for example as traction control with Wheelspeed Anytrim input.