V3 output channels visual

Subpage of Outputs menu


Output channels visual

This dialog helps to check and test the output channels.
If Output type shows conflict, 2 or more unit configured to the same output channel. It makes unpredictable result, so never forget to change it.

The dialog has a lot of capabilities:

  • On the left of the channel names you can select which units output you want to see on the Econoseal connector.
  • At Output type you can modify where to connect a unit, select which need to invert too.
  • If Switch testing mode is ON the output cannels can test, just tick to the test, and you can switch the output