Subpage of Motorsport menu

Launch RPM curve

As outlined in Launch control, the Launch control function can operate in either speed or time dependant mode.
Make sure you apply the correct firmware for function: PS2 type for time dependence or wheelspeed for speed dependence.

If this curve mode is enabled (last Road speed (or time) bin is non-zero) the normal function (enrichment + retard + ignition cut) works while the first Road speed (or time) bin is not reached.
After the first Road speed (or time) bin is reached only the ignition cut function works.
After the last Road speed (or time) bin is reached, the full functionality turns off.
To disable this mode set the last Road speed(or time) bin to 0 or disable in the Lauch Control dialog.
If time based launch control is used, the time start to increment when the button released.

The launch target RPM can be increased using anytrim, for more details see anytrim dialog.

note: after enabling curve mode make sure to fill the curve with sane RPM and speed/time values, when in doubt use gradual increasing speed/time bins and all RPM bins your configured Max RPM