Subpage of Base setup menu

This screen will setup which output pins that relates to each injector group. The table will be traversed backwards, according to the Injector Settings'screen.

For each table entry, choose which injector outputs you want to fire. In most installs, only 1 output is choosen for each table entry as that means 1 injector output is wired to 1 unique cylinder.

To properly setup sequential injection with end-angle timing (also requires cam sync) you need to set the corresponding injector for each cylinder in the ignition table to get the proper relation to the cylinder TDC on the power stroke.
Example: If ignition output for cyl 1 is at the top row of the ignition table, make sure the cyl 1 fuel injector is also activated in the injector group at the top row of this table.

If you want to use injector outputs for other purposes than actual fuel injectors, then you must remember to assign those pins to unused injector groups.