Subpage of Idle Control Settings

Idle Control, Ign. Advance

This function controls your Idle RPM by advancing or retarding the ignition timing advance; the advance controller output is superimposed on currenct active ignition advance.

Active
Enable/Disable the Idle advance controller, advance controller is normally used together with idle control solenoid but can be used standalone also.

Advance Change Max Advance
Maximum timing increase allowed.

Advance Change Max Retard
Maximum timing decrease allowed.

Advance Rate of Change
The number of degrees per 256 rpm idle error. Effectively the advance controller gain factor.

Idle Target RPM Cold Engine
Enter the RPM you wish to hold the engine when cold.

Max Temperature for Cold Idle RPM
The cold idle RPM is held up to this temperature.

Idle Target RPM Warm Engine
Enter the RPM you wish to hold the engine when warm.

Min Temperature For Warm Idle RPM
The warm idle RPM is held above this temperature.

Idle Afterstart RPM, Added Value
Just after starting up, raise the idle RPM by this much, while afterstart active.

Idle Afterstart Rampdown Time
Lower the Afterstart added RPM linearly down to 0 after each set cycle Time.