Round display settings

Subpage of Display Menu

Round Display Settings
This dialog can set the display properties on Round unit.

Last known display state: it shows the Displayed slot number (at last refresh)

Maximum Display Slot Number: it can limit the number of display slots

Display Dim Time and Display Bright Time : it sets the brightness and refresh frequency of the display.

Display type: By this the Round unit can mirror the displayed segments by 2 axis for special (HUD) installations.

AFR for Lambda 1: Afr multiplier. (eg. 147 for 14.7). note: AFR instead of lambda is bad practice (even if widely followed).

Display slot number while button pressed: if enabled. shows "S-0" .. "S-7" (the next slot index) while pushing the button

Units: the displayed unit selectors.