Error report: 2013-08-21 14:00:57
Status: Closed

Report generated: VemsTune (Help menu/Error reporting by one-click)
Hi,

i´m trying to get my project running.
Can only get the primary trigger (129 teeth) to record anything in trigger recorder. When I enable the CamSync for Sectrig, I don´t get any recordings anymore.
Tried out several pinnings of the two VRs, but nothing helped. See triggerlogs.
Also tried to disconnect ground to Pin13 but without success.

Actual settings:
speed sensor (129 teeth) to Pin 27
refernce sensor (1 tooth) to Pin 12
Pin 13 grounded (same ground like Pin26)
Note: You can share the link with your friends or keep it secret.
Show/Hide report details
Comments 
MacB 2013-08-23 05:35:49
And which firmware do you recommend ?
Marcell 2013-08-23 04:01:53
The "nr of cylinders" is only used by the ECU for the RPM calculation.
For 6 cyl, normally 6 must be configured (when 1 sectrig pulse every cam rotation).
Since there is 1 sectrig pulse every crank rotation in this case, 3 must be configured.

Marcell
MacB 2013-08-23 00:47:58
I saw that you configured 3 cylinders, 6 ign outputs and based the .vemscfg on firmware on a beta 1.2.15.
Which firmware should i use ?
3 cylinders and 6 ign outputs is correct ?
admin 2013-08-22 09:01:04
We benchtested your config, and we can make it work.
TriggerLog: (http://www.vems.hu/files/MembersPage/MarcellGal/BenchTest/Report-2013.08.21-22.00.57-c129/6cylPorsche_c129_divby43-1000RPM-triggerlog.png)

We use this configlet to modify your config(http://www.vems.hu/files/MembersPage/MarcellGal/BenchTest/Report-2013.08.21-22.00.57-c129/6cylPorsche_c129_divby43.txt)

Your modified config:(http://www.vems.hu/files/MembersPage/MarcellGal/BenchTest/Report-2013.08.21-22.00.57-c129/c129-good-v3.3_u004521-A-2013.08.22-16.48.20.vemscfg)

You need to configure 3 ignout ch even if all 3 are same.
You can verify ignition with strobe.

Support
Marcell 2013-08-22 05:36:18
1 thing is for sure: this trigger will NOT work with sectrig=DISABLED.
We'll give it some testing.
Marcell
Navigate
Login
VemsTune
VemsDisplay
Vems.hu main site
Purchase V3 ECU
Attachments
No attachments.

New upload