alert(123);

">alert(0)

We're sorry for hear that. We hope that will work well with the new bluetooth adapter.
Please report the result.
Thanks
Support

I cannot get this to work. I am at the limit of my computer knowledge!

In windows bluetooth manager under the devices tab I have Firefly-7CA6. Under this device\'s properties in the services tab is says \"serial port (SSP) \'SSP\' com9. See pic.

In windows bluetooth manager under the Com ports tab it shows Com9 as Outgoing FireFly-7AC6 \'SSP\' and Com10 as Incoming Firefly-7AC6 again see pic

Running BluetoothConfigSaver.exe in a command window results in the following with com9 not detected and testing com10 it just sits there. This is with V3 powered up connected to Com1 via serial cable and Vems Bluetooth adapter powered up not connected to any physical Com port

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\\Documents and Settings\\fraggle>cd\\

C:\\>cd bluetoothconfigsaver

C:\\BluetoothConfigSaver>bluetoothconfigsaver.exe -p com9 -b 19200
Cannot Open Port com9
Please check that port exists or another program doesn\'t use it.

C:\\BluetoothConfigSaver>bluetoothconfigsaver.exe -p com10 -b 19200


I have tried the above connecting the Vems adapter to the V3 but still the same.

The bluetooth adapter I have for the PC is a generic cheap shit item I bought specifically to diagnose these problems since the Android devices would not communicate. I will today order the bluetooth PC adapter from the webshop.

We tested Vemstune with a bluetooth device with 1.2.11 firmware.
We found that's working.
We made a small console tool for saving bluetooth device settings.
( http://www.vems.hu/files/Tools/BluetoothConfigSaver.zip )
Run BluetoothConfigSaver.exe from a console ,then send us bluetooth.cfg.
Usage:
BluetoothConfigSaver.exe -p -b '
Example
BluetoothConfigSaver.exe -p COM13 -b 19200
We will verify it.
Thanks
Support

Can you try it with Disable baudratechange = yes in VemsTune?
Thanks
Support

Can you try it with Disable baudratechange = yes in VemsTune?
Thanks
Support

Attached 'Console' data capture with Aim disabled, still no communications. Please can some one look at these, as i have no idea what it is trying to tell me. >>>>

Thanks
Colin