Hello CamB,

No worries, good to hear its resolved now!

Best regards, Dave

Worked with 1.5.8 - apologies for not reading the wiki page carefully.

Also works with 1.5.8 and 1.5.10 with the Dev version of VT noted, although I am sure that doesn't surprise you!

Hello CamB,

Thanks for the report was able to pinpoint the issue.

1.5.10 requires a Dev version VT (04-04-2015) as annotated on: http://www.vems.hu/wiki/index.php?page=AfreshTiny
Required VT version available here: http://vems.hu/download/v3gui/dev/VemsTune-Install-2015-04-04.exe

Any version between 1.5.7 and 1.5.9 should work without problems with your current VemsTune version.

Best regards, Dave

To be clear, "working" on 1.5.3 means that the gauge works rather than stuck in peak mode. No menu item in 1.5.3 for peak / hold (and possibly wouldnt expect it given not a feature that exists in that firmware?).