Subpage of Motorsport menu
Launch RPM curve
The Launch control can works with speed or time dependent mode too.
It can set by choosing the correct Firmware: PS2 type for time dependence or Non-PS2 to speed dependence.
If this curve enabled (last Road speed(or time) bin is not zero) the normal function (enrichment + retard + ignition cut) works while the first Road speed(or time) bin not reached.
After reached the first Road speed(or time) bin only the ignition cut function works.
After reached the last Road speed(or time) bin, the full functionality turns off.
To disable this mode set the last Road speed(or time) bin to 0 or disable in the Lauch Control dialog
If time based launch control works, the time start to increment when the button released.
note: if have Speed signal, always use curve mode at least static mode (all speed bins 255, all RPM bins your configured Max RPM) The target RPM also can increment by anytrim, for more details check the anytrim dialog.
for more information please check: Anytrim control