Wishlist
This page should generally contain only wishes and observations about functionality, not bug reports. Use IssueReports/VemsTune for bug reports.
Auto Tune. Inspiration for developers http://www.youtube.com/watch?v=qwkqjotkDJQ&feature=related
General wishes
- Handling of files coming as a starting parameter from explorer. For example double clicking on a .vemslog file in Windows explorer can end up with starting vemstune (with the right association set, best would be vemstune-installation time) which is fine, but then vemstune should handle the file just like it does when the file is drag&dropped over it.
- Analog input calibration is graphical as well. i.e 2d curve is automatically drawn for the relevant sensor being updated. User can then test the response by inputing test values to see engineering values
- Vemslog to csv : actually creates a csv file, not a tab limited file.
- Probably TAB delimited csv should be forgotten forever: it's very fragile and found to break on different language version of windows, office, etc... ';' delimiter seems to be more robust
- New empty groups/sheets/tabs can be easily made
- Groups (worksheets) can be saved like files and opened like files by exporting / importing into workbooks (not like current implementation of exporting all the gauges on a sheet, then having to make an empty one and import gauges again)
- All Groups (and all gauges within those groups) / channel descriptions / custom math channels are saved as a file, allow option of selecting which such workbook to use on startup.
- add mouse oriented option for exiting from Fullscreen mode
- Ignition Analyzer like VE-analyzer couple of WOT runs on stretched road over rpm range
- step0: Run 1 record ignition angle and A/F
- step1: Run 2 retard ignition 2 degrees and run again
- step3: compare A/F in run 1 and 2
- step4: if step1 A/F > step0(retard 2 degrees) else advance 4 degrees. ect. ect.
- in multigraph, Select A=>B, press enter => should bring up (zoom into) the selected range A=>B
- ESC should "zoom --" (Zoom out completely). These functions together allow to quickly inspect the interesting parts of a log.
- "Jump to next boost" quick-key would be awesome. (it would jump to the start of next MAP > 110+ kPa part, and autozoom so the relevant section is shown: screensize min 10 sec, max 60 sec).
- Drag&drop(like VE,spark,lambda..) for tables for boost control(boost target and ref DC table), also for knock table
- Table remap should allow changing min/max bin values, currently you have to edit these before a remap if you want lower min or higher max value.
- TPS Calibration wizard, a few easy steps to calibrate the throttle position sensor.
- The wizard figures out the sensor polarity and enters the numbers for the user.
- will be available in the next release
- Store folder locations in memory to remember which folder the user last saved/opened files to/from. Location is reset when ECU comes online to point to the ECU working directory.
- Fix in next release
- User marker while datalogging should give visual feedback (status line text and colour field blinks for 1 second).
- will be available in the next release
- 3D table editing
- Add option to have coloured polygons instead of wire grid, to get a 3D surface look. Custom and default yellow-green-red palette. It is useful while tuning to more quickly grasp the shape and values of the table. Intersecting points can be highlighted to reflect changes not sent/burnt to ECU.
- VE tune by statistics
- needs more documentation, re-worked and integrated better into the software
- http://www.vemssupport.com/forum/index.php/topic,1186.0.html
- Boost control
- needs documentation
- clearly defined features with examples
- Triggerlog
- 0-720 degree event diagram based on ignition and injection settings
- helps set up ignition order and timed injection
- Add option to lock settings windows button row buttons (Refresh Send Burn Import < > Close) for every window. Moving the mouse cursor is more time consuming on a laptop; if the cursor can be left in one position while user tabs through text boxes for settings then can click ">" without moving mouse, it should make for easier menu navigation.
- < and > buttons should be disabled when at the first and last menu, respectively. Current behavior is not bad but user may wait for next menu when it does not exist.
- Fix in next release
- Add option to set theme style on all gauges or a selection of several gauges at once.
- In next release switch to Edit mode, and right click on the background.
- Add ability to save notes to configs, ie as an English description of changes since last config.
- Varying behavior for disabling settings in various dialog boxes. Some text/dropdown boxes are not disabled, etc.
- Web Proxy server support for "Firmware Web tool" and possibly elsewhere also
- we are working on it
Found this program Virtual dyno and hope we could have the same function in Vt so we can see when we are making more power Hp/Nm
http://www.bradbarnhill.com/projects/VirtualDyno/
make a 2000-6000 pull and 100% tps
Convert to .csv
open csv file in excel
delete the first line “vems” to make it work
Nice functions to have in Vt:
Peek Nm and Hp
3 runs graph in the same row
Measurement on the fly
Was implemented as a log-analysys expert tool: LogAnalysis/PowerCompare . A more user-friendly, and possibly realtime tool would be nice though.
Addition to this idea -
Re-iterated in hopes of implementation into Vemstune or as an example :
Vemstune can export real .csv files not tab delimited files named .csv like now and they can be opened via Virtual Dyno.
The first line of the log where it says "vems" could be skipped.
The .csv file can be made from viewing a section of log in the Log View and right click - save as .csv file
Then it can be opened by Virtual dyno without any editing.
Wish for the Round
A wizard to create the wideband custom curve would be very useful, just a simple two point linear curve generator would suffice in most cases that allows you to simply set min/max lambda and corresponding min/max output voltage. It's also useful to have a test-mode where you can force the output while checking for the same result in the ECU that receives the signal. The test mode is useful for all output types, not just the custom curve. I got within 0.01 AFR acurracy from 10:1 to 20:1 AFR with an Autronic unit, if not for the test mode I would have been 0.4 AFR off at either end of the signal.
Download WButil for TechEdge WBO2 and play with it: [Unzip and run]
Here is how it's curve wizard appears with the test mode,
The blue line is the wideband units signal and the red line is generated from the wizard. The crosshair is at the test output voltage.
Log viewer
- X/Y Scatter plot based on any channel for either X or Y axis with configurable axis and automated scaling
- Histogram plot of any channel
- Multiple log files opened at the same time
- channel time offset, allows moving Lambda value channel about to fit actual operation of engine.
- Allow more then 4 channels at a time in the same graph portion
- Improve speed
- Zoom in/out and scrolling in graph is slow compared to other systems
- Multiple key presses for zooming in/out should not trigger another redraw while one is progressing
- Search in log with expression speed up, slow even on short logs
- we are thinking on it, try to find out something
- "Time Re-set Mode" - allow time line to be set at "0.0 sec" at cursor to start time at "0.000 sec on Drag Launch (use "T" Key)
- we are working on it
- Quick method of finding of maximal or minimal values (right click on symbol in graph)
- will be available in the next release
- "Compare to" mode through overlay of a log over another
- quick on/off key for the overlay ("Insert" key to add/remove 2nd log)
- easily shift the 2nd log in time to align to events occuring in both logs
- "Cursor stay in center" mode (use "C" Key)
- Auto-adjusting min/max values of graph in symbol menu
- Calculate average value of symbol in selected area
- will be available in the next release
- Show min/max values (next to symbol title?)
- will be available in the next release
- Zoom using up/down, not only pgup/pgdn
- you can set any key for any exists function in Preferences / Hotkey config / MultiValue graph
Separate topic on support forums : [link]
Postponed ideas
- remove backwards running injection, trigger tooth and ignition order in output tables.
- going from top to bottom would cause a big confusion and render lots of text invalid (some uneditable like in forum posts). We do not want to confuse our installers simply by changing that
- short-run: add arrow to show direction (already implemented).
- Going in a circle (it should be clockwise, I guess): this would not cause confusion. Arrow is still good.
- Even more useful: marking which cylinder it relates to!
- Video problems make lines hard to see
![[1]](http://www.vems.hu/files/GintsK/VT_logscreen01.png){kind=link}
![[2]](http://www.vems.hu/files/GintsK/MLV_screen.png){kind=link}
![[3]](http://www.vems.hu/files/GintsK/MLV_screen02.png){kind=link}
![[4]](http://www.vems.hu/files/GintsK/VT_logscreen02.png){kind=link}
![[5]](http://www.vems.hu/files/GintsK/VT_logscreen03.png){kind=link}
- Move channel values to right side of screen (out of the way) like in MLV.
- Apply math formulas to realtime data symbols
- Ablo to convert voltage in milliVolt to : bar, kPa, PSI, MPH, Degrees F, power from torque input and rpm
- For a long while I have had MLV display new VE values for fuel tables based on lambda target, lambda, ego closed loop correction and air temp correction. This along with a math channel that displays Lambda error I can very quickly identify how far off the VE value is so this seeing problems with VE is just instant, and then apply the new VE value to the fuel table.
- some use for led 2, misc out like power on led or problems indicator.
- It is on one of the P259 channels - if you want to use it, then select it for the warning light or other function. See GenBoard/Manual/DigitalOut/Table
- Yes but i think its nice to turn it on when the board is power on aside the blinking telling the processor is running.
- It is on one of the P259 channels - if you want to use it, then select it for the warning light or other function. See GenBoard/Manual/DigitalOut/Table