Subpage for VemsExecutives
Because of time pressure ( WBO2 , display, ArmEfi design ):
- Marcell Gal is casedesign executive
- Fero (Ferenc Kulin) is vice executive
Plan
- DONE: negotiate with a new CNC partner with nice CNC lathe and CNC milling capabilities
ASAP: 2005-05-21 .. 2005-05-28
- Find an appr. 40x120mm extrusion that looks nicer than the 50x100 rectangle. The 50x100 will also be nice, with powder-type painting or sanding, and nice sticker. But why not make it as beautiful and original as possible. Unfortunately final routing of both VemsFrontier/ArmEfi and a display made from same extrusion depends on it.
- check O-rings that can be used
- choose plexiglass colors
2005-05-28
meet with partner about
- round display case: seems smooth, from an Al piece and a plexi
- endplate for chosen extrusion (Al and Plexiglass)
- frontplate for chosen extrusion
- make models and discuss
Candidates - for future
- Kulin Ferenc (MembersPage/Fero) (40 hrs/month)
- Rob Humphris (? hrs/month)
- Jörgen Karlsson. Good knowledge about the tools and procedures, good sense for the mechanical function of the finished product and cost for the solution. Fair sense of the estetics. But I'm not close to our current manufacturing facility and do not use the same primitive tools (like using Corel draw to make the parts.) as the manufacturing facility we are currently using. (40hrs/month)
nocandidates