Subpage for VemsExecutives
Because of time pressure ( WBO2 , display, ArmEfi design ):
- Marcell Gal is casedesign executive
- Fero (Ferenc Kulin) is vice executive
Prepared
- everything is ready for the manufacture of round cases
- everything is ready for the manufacture of cases based on 120x40x2.5mm profile
Plan
- more investigation about small dongle "case"
- wait for final decision on connector and placement (responsible is VemsExecutives/HardwareDesign ). Besides the EC36, the SAAB70 is also a candidate, although not sure how it fits, since the SAAB70 is wider than 120mm externally. For the IonSense/CDI board the EC36 seems like a better candidate
Candidates - for future
- Kulin Ferenc (MembersPage/Fero) (40 hrs/month)
- Rob Humphris (? hrs/month)
- Jörgen Karlsson. Good knowledge about the tools and procedures, good sense for the mechanical function of the finished product and cost for the solution. Fair sense of the estetics. But I'm not close to our current manufacturing facility and do not use the same primitive tools (like using Corel draw to make the parts.) as the manufacturing facility we are currently using. (40hrs/month)
nocandidates