BMW S54 (or [S54B32]), as in the e46 M3, M coupe, and M roadster
Probably the most advanced BMW I6 engine, BMW was criticized for ending manufacturing (in favor of the shorter V8-s). Fully supported by VEMS (order with proper options, see below).
3.2 liter Dual VANOS, Individual Throttle Body, 333(US)/338(EU)bhp factory spec.
- Cylinder bore: 87 mm
- Displacement of 3,246 cc
- High pressure Double VANOS continuously variable valve timing system with faster operation at high rpm
- Compression 11.5:1
- Finger-type rocker arms for reduced reciprocating mass and friction
- One-piece aluminum head casting for lighter weight
- Scavenging oil pump to maintain pressure during heavy cornering
VEMS ECU Config:
BMW S54 dual-VANOS engine: VR, HALL, HALL + 4 * PFET high-side switches for the 4 hydraulic cam-actuator solenoids
- There are 3 engine speed sensors. One on the crank (VR) and one on each camshaft (HALL), so order ECU with 3 trigger inputs. * order ECU with 4 PFET high side drivers for the camshaft solenoids since they require switched 12V, not switched GND like traditionally run solenoids.
- ETC (DBW drive by wire Electronic Throttle Control) supported, all the usual things apply:
- read VT help
- ETC is for careful, experienced installers. Understand the concept and details, create your page from MembersPage , configure with safety relay, check the margins, ...