Today i put vems on honda s2000 stroker(2.7l) with sequential gearbox(quaife). Gearbox also has drum sensor.
It's true, firmware was tested with sane drumsensor, and configured properly. Either just proper configuration needed, or maybe firmware-modification for weird drumsensor.
Problem is that gear box has strange outputs (non-monotonous: doesn't rise all the time).
So 1st gear is 0.98V, 2nd 0.37V, 3rd 4.51V, 4th 3.86V,5th 3.31V,6th 2.76V
- sorted: 0.37V, 0.98V, 2.76V, 3.31V, 3.86V, 4.51V
- of course gears are "renamed" but shiftcut should still work if the drumsensor outputs consistent voltage
But look at log, vems has problem with detecting gear.
http://www.vems.hu/files/DamirMuha/1.2.11/DrumSensorv3.3_u006633-2013.03.18-16.09.19.vemslog
Engine is off and it's easy to see voltage between gears that can use for shift cut.
- voltage should not be "between gears" ... if configured properly. Does the voltage (measured with DVM) change .... "float" ?
- are the grounds done properly ?