Some Title
A good description.
- IonSense - Ion Sensing
- GenBoard/Manual/WBSensor - Wide Band O2
- GenBoard/Manual/NBSensor - Narrow Band
- ManAirPress - Manifold Air Pressure
- ManAirTemp - Manifold Air Temperature
- CoolantTemp - Coolant Temperature
- GenBoard/Manual/InputTrigger - All input trigger topics here
- ExhaustGasTemp - Exhaust Gas Temperature
- DetonationDetection - Detects pre/unwanted-ignition
- MassAirFlow - detects airflow
- InCylinderPressure - allows Pressure and Knock meassurement for each cylinder
Easy Therm
Part of the original MegaSquirt Project, that enables you to use different sensors than the standard GM ones. Complete details can be found [here.] It can be downloaded http://autos.groups.yahoo.com/group/megasquirt/files/EasyTherm/ here.] You must be a member of Yahoo Groups to access the MegaSquirt group.
One point that is not explained well is the value of the Bias resistor that is used in Easy Therm, if you look at GenBoard/VerTwo/CircuitDiagrams, sheet 5/6, the 'bias' resistors are R15 and R16 and both 2.49K - which is the Easy Therm default (For v3.x, R9 and R10, a bit to the left from MAP-sensor..)