Peugeot 406 Coupe 3.0 V6 XFX
Vems V3.9 green board (sn 22121)
Wasted Cop
I have huge problems about primary trigger. Please help.
I installed several vems v3 but this is new for me.
Car has only one crankshaft sensor (VR) on flywheel with 60-2 wheel. Running on Wasted spark.
The VR sensor has 3 pin. (OE number 9622209880)
Signal
GND
Shield
Double check polarity.
The sensor has 330ohm.
The signal in trigger log is great. Looks everything good. The car started with some trigger error but running.
After 10 sec the engine stall with trigger error (less PR trig).
Then never ever comes any trigger spike or something in the trigger log. RPM signal gone.
I have another vems ecu too. Changed them. Same. Car starts running few sec and shut down.
Then no signal ever.
Seems both ecu trigger dead.
Removed R30
New sensor installed
Still same
Any suggestion to measure? Thanks
I didn't get any help for vems wiki and vems.hu,
so i tried several things. Finally the p259 replacement solve the problem. (maybe was gnd problem earlier)
Anyone need help, use facebook group: "VEMS Users Group" (helpful)