Ford Sierra Cosworth 2wd
Original 8+2 trigger not supported yet.
The engine is not start with 1.1.33 firmware. It seems a ignition timing problem at crank, because andvance is changing randomly.
Initial syncup sequence fixed in 1.1.42. We could add the new config variables, and test 1.1.42 with your config.
- can you upload your 1.1.33 config ?
The working configuration is:
36-1 trigger wheel on the crankshaft pulley.
Original VR sensor in original place.
No secondary trigger yet.
Wasted spark.
Firmware version: 1.1.27