Skoda Octavia dedicated track race car with
- VAG Audi 1.8L 4cyl 20valve NA engine
- WBO2
- EGT
- LCD
- knock-detect
- heavily modified intake system (individual throttle bodies,no airbox or filter)
- Kit-car exhaust manifold (very long 4 to 1 design)
The engine is currently not controlled with
There would be appr. 6 similar installs within a year if all goes well.
Trigger setup - under investigation
- maybe 60-2 VR on crank - must be confirmed
- maybe 1-pulse HALL on cam - must be confirmed
The genboard is wired up except the crank VR (hopefully a 60-2),WBO2,EGT,injectors and coils.It communicates with the megatune,TPS,batterycalibration,MAP already works
Please tell me how to wire up
- The WBO2 (found several infos,but all suspicious)
- The coil ( a wasted spark unit) has a 4 pin connector
- Where to connect injector common (FUSE car side??),EC-36 pin 22?????
- Cant find any useful info about TPS blend,where can i set the desired TPS related Injections??After i set the MIN and MAX RPM's in megatune,where can i tune the alpha-n settings?Will the VE table under the certain alpha-n treshold now represent the TPS position?????
- How to wire the crank VR?
is the middle always the signal as on the hall units???
Can i damage anything if wire wrong??
looks like the Astralogger has its own sensors (checked all inputs ,working without "original" ECU,and ECU sensors)
i think that the camsync signal is used by this logger for RPM signal...
Please answr ASAP,
Thanks a lot,Peter