MembersPage/VdBVolvo (2006-07-12 20:49:19)

Installing Vems3.3 on a Volvo 244 with a B21ET engine. Taken out the dreadful K-jetronic to get complete control. This car should be competing this year in the Benelux Driftseries.

My name is Jochen aka Brickdrifter and I'm living in Belgium.

img86538ys.jpg

11-07-06

New Q: Please take a look at this log. It's got a dip near the end where dutycycle and rpm drops to 0. What could be causing this?

http://www.driftingforlife.com/images/picsjustforme/11_07short.xls


05-07-2006

Q: The p259 channels do not work anymore, tried all of them with off course the corresponding pin on the connector. I guess I put a +12 current through the channel. What components could be/are destroyed?

//Had similar problem. TPIC6A259 ic was damaged and had to be replaced (it's in the webshop too). Nothing else affected. Check for GND connections, it's always suspicious! //GergelyLezsak

11-07-06

Thanks, ordere the TPIC6A259. Hoping to get it replaced soon.


Q: can't get the Lambda sensor calibrated in free air. Done the test as in http://www.vems.hu/wiki/index.php?page=MembersPage%2FPhatBob%2FUserGuide and all checks out. In Megatune I've got the WBO calibration down to 1 and still I get a reading of 30,95% O2

OK, solved. Got the same reading now as my Innovate LM-1 has. Thanks Rob