- Trouble configuring sequential trigger!
- is this also called camsync ?
- Trigger setup for Alfa 60 deg V6
- Already has 60-2 VR bosch wheel
- Sequential ignition desired
- six logic level GM coils aquired
- Vems ordered with "auditrigger" feature
Bench testing
- m582_1740_200_20_1000_1000.wav
- wav file sent using audacity
- primary trigger EC36-27
- secondary trigger EC36-13 (is this correct ?)
- Works in wasted mode according to megatune
- lots of trigger errors with secondary trigger enabled cause I have no clue what vems needs to know.
Questions
- Need to upload a little cad drawing of trigger setup to use in discussion. How is that done.
- Are megatune values always specified as degrees or are some specified as 0-255 values.
- current config values:
rpmk[0]=07
rpmk[1]=D0
primary_trigger=01
secondary_trigger=11
tooth_wheel=3A
trigger_tooth=07
another_trigger_tooth=14
crank_minper=9C
tooth_wheel_twidth1=02
tooth_wheel_twidth2=06
cam_sync_r_edge_phase=3C
cam_sync_f_edge_phase=50
reset_engphase_after=F0
ign_tdcdelayign_tdcdelay=B0