VEMS install on 3 cylinder 2 stroke engine
Trigger: 36-1 without camsync
This hardware configuration is the same as a 6cyl 4 stroke engine with wasted spark ignition (each ignoutput fires every crankrot).
[Corrected and Bench tested config]
- note that this cheats (6 cyl 4 stroke configured). We strongly recommend this instead of the 2 stroke 3 cyl setting.
Reported problem with the received (wrong) VemsCfg
- the engine started and then goes the rpm gauge from 1000rpm to 7000 rpm but the engine have not 7000 rpm he has max idle rpm 1000 to 1500rpm
Findings:
- wrong trigger settings (correctly next trigger tooth = 12
- wrong trigger tooth table order (must be 0 24 12 ... from top to bottom)