Hi.
I have noticed that V3.8 have some differences when adding third trigger.
I have made the same circuit i used on ma 3.7 board but on the 3.8 board it does not seem to work?
I read somewhere about some capacitor need changing?
Please write a complete guide of what needs to be done for third hall trigger on 3.8 board.
Im trying to change this unit s/n 9422 from VR/VR to HALL/HALL/HALL
Atleast I think it was VR/VR because is has the second LM chip.
Whats strange though is that the blob under the FETS where open.
But when I try to ground the signal on Pin 13 It looks like VR interference, not clean signal.
And no signal on third what so ever. Have I just forgotten some settings in VEMStune maybe?