VEMS install on Volvo B6304
Also applicable on Volvo B6254 / B6258 / B6258T
2016 Vemscfg (Tuning by MembersPage/MattiasSandgren )
http://www.vems.hu/files/nier/2016.05.07-b6303turbo-nier.vemscfg
- Obselete - TDC not configured correctly. (Naturally aspirated)
My MSQ - 090903 - http://www.vems.hu/files/MembersPage/ThePirate/volvob6304_98.msq
My MSQ - 080926 - http://www.vems.hu/files/MembersPage/ThePirate/volvob6304_95.msq
Status
Now... Car painted, turbo installed.
090903 - Car assembled and tuning started. Paddleshifting the transmission works!
080820 - VEMS installed, and engine started with cam-sync active
My Vems 3.3 specs
- 30V Flyback
- 8 ignition drivers
- Onboard 400kpa MAP sensor
- VR as Primary Trigger
- Hall as Secondary trigger
- Wiring harness made by myself
- LSU4 Wideband oxygen sensor
My engine
- Volvo B6304 standard
- KKK24 turbo (from later S80 T6)
- VR on crank
- Hall for cam sync
- Volvo COP ignition (non-smart)
- Stock TPS
- Stock IAC not used
The car
- Opel Rekord C Coupé 1968
- Custom front end with Volvo 960 front axle, suspension and steering
- Moved firewall ~10 cm
- Volvo 1041 rear axle with locker
- Rollcage
- AW30-43 Automatic gearbox with custom electrical controller for manual shifting. Crouzet Millenium 3 12v dc plc with my own program.
- Custom alu fueltank in trunk with dual fuelpumps
Pictures
(Old...)
