Here are my current problems, which need solving.
Trigger errors around 5500
For some reason, when i try to rev above 5000, i get trigger errors, and spark disappears until revs go below 2000.
Sounds just like auditrigger problem, but how could this be.
I will try to change my current Hall-sensor to VR, when i get the required hardware-mods done. Still, this shouldn't be an issue.
Incorrect Wbo2 -readings or other misconf
It's impossible to adjust idle AFR to near 14.7, car stalls much before that. I cannot figure out how this could be possible.
Before VEMS (no HW mods to engine or ancillaries) this was no problem.