Teppo Kalske from Finland, born 1972
I'm currently using VEMS on my daily driver Audi RS2 with 16x14 maps.
Just tested 1.1.9 firmware with auditrigger:
- Gets cam sync much faster when cranking than older version, very nice!
- When revving engine without load (neutral) gives trigger error around 6500 rpm
- When revving engine with load (2nd gear) gives trigger error around 4000 rpm
- after trigger error ignition stays off until revs are below 2000.
- base timing seems to be quite a bit different than with earlier firmware
---
Here is config and tables:
http://www.vems.hu/files/Firmware/release/v3_firmware_1.1.9.zip
I'll post a log later