Sibling page: MembersPage/TahitiBmwSthirtyEight
BMW S50B32 (M3 E36 3.2L euro version with double Vanos ) turbo engine with (6 cylinders)
- Primary Trigger is: VR
- Secondary Trigger is: VR
- third trig: VR (ordercomment)
While [VEMS ECU can control any spark ignition engine],
- [VEMS with motronic88 connector] is best choice for S50B32 engine
- choose S50B32 option of course
- VR,VR,VR trigger (why did you think cam is HALL ? According to our info all factory S50B32 should be VR,VR,VR ! But easy to measure...)
6 High Z (saturated) injectors which I want to control them in Full Sequential Procedure
Ignition: with individual coil which I want a Full Sequential Procedure
2 knock sensors already installed on the block
1 External map sensor connected in the Inlet Manifold
1 Exhaust Gaz Temperature already installed in the exhaust piping
1 Boost Solenoid connected to an external Wastegate
BMW S50B32 (M3 E36 3.2L euro version with double Vanos )
- 1-wire interface NO
- EGT input 1
- ETC Bridge Output_Interface 1 => NO please !
- Flyback HighZ-only 30V flyback
- Hi-side PFET outputs 4
- ignition driver 6+2
- Knock input channels 2
- LCD connection yes
- MAP connection offboard (electronic)
- mounting-style no-screws
- primary_trigger EC36/27 VR
- secondary_trigger VR (NOT HALL !)
- withSDcard removable
With correct trigger VR,VR,VR and 4*PFETs => Dual Vanos can be controlled