Suzuki - unknown engine
Specifying ECU (inputs, outputs, mechanically)
suzuki_swift_wiring_diagrams_1997.pdf is helpful, but not enough, by far.
Factory connector should be used.
- can be placed in VEMS box (best)
- or factory box (seems more difficult to get right)
- or even adapter small harness (not really justified)
Output
- Logiclevel ignout pin10 (no idea if 5v/12v needed). External ignitor triggered from pin10 ORG
A/C ? AC-idle up in pin19 BLU/RED; AC Cut-out pin17 LT GRN/RED
FAN? pin20 BLU
idle valve type ? PWM type, pin24 GRY/RED
Tach out? Tach is triggered from coil directly, not from ECM.
Other ? flying loom EC10 or SSC would be nice:
- a few extra outputs
- a few analog inputs (min 2 pulledup, min 1 with no pullup)
LATER: (exact mapping enough during manufacturing)
ignouts
injouts
idle out(s)
Inputs
- VR, VR
- primtrig VR c22/pin3 WHT/BLK, c22/pin11 WHT/RED;
- sectrig VR c22/pin10 WHT, c22/pin2 ORG
- NO Knock
- Wheelspeed ? VR c23/pin13 LT GRN, c23/pin2 VIO
- MAP sensor: offboard ?
- MAP signal: c22/pin5 LT GRN/RED
- MAP 5v: c22/pin1 LT GRN
- MAP GND: c22/pin9 LT GRN/BLK