Sub page for MembersPage/SteenAndersen
My Progress status
This page should describe my progress
04 Apr. 2005
Compilation of firmware problem from MembersPage/SteenAndersen/Questions page is solved.
1 - I did un-install WinAVR version "WinAVR-20050214-install.exe"
2 - Installed the version from "WinAVR-20040720-install.exe"
3 - used, make clean[Enter] ; sh [enter] , then make all [enter]; and this time no errors
Viola.
Update: 03 Apr. 2005
OK. I gave up to compile the Firmware, and downloaded the released version form GenBoard/UnderDevelopment/FirmwareChanges
I got the serial port to work from perl by installing Win32-API + Serial port support. And succeded to upload Vems.hex file to GenBoard.
I tried to use Megatune, but the configuration files seems to be wrong. I can see the reealtime parameters like temp, rpm, clt, iat, a.s.o.
Then i trid to install MegaTunix, it seem to work until i enter the motor detail s page then i crashes.
So for now i only have RS232, LCD, PS2, and perl up working
I tested almost all the port's with mdhXX command.
Next i think i have to start consider how the tables.txt and config.txt will look like.
Update: 25. March 2005
I Have Connected and Tested Communication to RS-232, PS2 Keyboard, and LCD Display. I tried the mxc command, ant tried the mcd and got the whole set off parameters in return. YAHOOO....... :-)
So far it's a success; but i must say that it's not that easy, because of the lack off a better toturial or building manual.
The PS2 connection has been corrected in [the manual] - thanx for the feedback.