Logic Level Output
Comment from another page by Emil "Use the same driver as the original IGBT is driven from, just solder a jumper wire in place of the IGBT (don't solder IGBT for given channels), between the gate and drain (the 2 pins closest to the EC36 connector)"
- 4+4 Power/Logic outputs http://www.vems.hu/wiki/index.php?page=GenBoard%2FManual%2FIgnitionOutput
- I259 channel 2,3,6 and 7 are Power (EC36/10, EC36/24, EC36/34 and EC36/36) with IGBT installed
- I259 channel 0,1,4 and 5 are Logic (EC36/11, EC36/12, EC36/33 and EC36/35) with simple jumper wire installed
Return to MembersPage/Sprocket