About my project.
The car is a 1970 MGB originally with four pot engine, but in 1985 I needed more power so I converted to V8. The engine is from a Rover SD1 and is with twin SU carburetors and in present form about 160 Hp.
Plan is to convert to injection by using base part of manifold from Range Rover, with special made top part, as high in engine compartment is limited. Other parts will include injections nozzles, pump and pressure regulator from Range Rover and Gemsboard Ver. 3.2 to control it all.
When injection is install and running I will go on with ignition probably with four coils using waste spark.
2004.12.15 Søren.