| [ Start] | [Questions ] | [ Injector] | [Ignition] | [Triger] | [Display] | [Wbo] | [Config] | [Table] | [Wiring] | [Idle] |
I would like to use the knocksensor,and i have already wired it in,but i cant get any reading,
how can i make one of the gauges in megatune to show noise?
So i can define what noise is knock
when i make a datalog,and wiew the log,megatune is 2-3 degees of in advance is this normal?.
Also if i in the sparktable ,write 16degree , then the advance gauge is only showing 14degrees, check knock_default_retard since knock_default_retard=08 this is correct.
there is also a big change in fuel,with inlet temp,
When i have the car in idle,it can go from lambda 0.9 at around 25iat degrees, to lambda 1.1 at 45 degrees,
After you tuned the WARM engine, adjust warmup enrichment, that is warmup_clt[]
Or ego needs to be alot more then 5procent, to make up for this.