Westfield 4.6 Rover V8 (VEMS EFI)
Car Spec
- 1997 Westfield Seight (S8)
- Big alloy radiator
- 4 Pot alloy billet front calipers with drilled & grooved discs
- 2 Pot alloy billet rear handbrake calipers
- 3.92 rear 7ins ford LSD differential
- Rover LT77 (heavy duty ) gearbox
- Toyo R888 tyres (205x50x15)
- Protec alloy dampers all round (350lbs front & 275lbs rear)
Engine Spec
- Rover V8 4600cc (S46D)
- Stage 4 cylinder heads
- Polished & ported 48mm inlet manifold
- Polished & ported 48mm trumpet base
- Piper 285 camshaft
- Serpentine front end & oil Pump
- Modified plenum chamber (standard bore)
- Trap door lowered sump
- Gems flywheel with rear pickup
- what primary trigger pattern ? 36-1(trigger 20deg from tdc)
- Magnecor 8mm plug leads
- Rhodes lifters
- Crane adjustable pushrods
- 220cc injectors
Vems Spec
- Genboard V3.3
- 400kpa map sensor
- 20x4 LCD dash display
- 4 wire stepper motor
- 2off knock sensors
- 1off lambda sensor
- EGT thermocouple
- 4 coils runnings wasted spark
Picures and latest config & vemslog can be found here
More pictures can be found here.
http://s875.photobucket.com/albums/ab319/seight-v8/Westfield%20Kit%20Car/
Winter 2010 Upgrades
- Act 70mm Carbon plenum chamber (need to cut & weld throttle housing to meet plenum)
- Modify GEMS camshaft sprocket to use with secondry trigger for full sequential injection.
- Race technology DASH2 upgrade to instrument to use with GPS & vems logging.
- Upgrade firmware from V1.1.78 to V1.1.81.