VEMS v3.3 running 1.1.27 fw (serial nr: 1776)
It will be built in using the original wires and sensors.
About the engine:
Primary trigger: missing tooth, 60-2, bosch VR sensor (polarity checked)
Secondary trigger: hall (not used yet)
Knock sensing will be used later
Wide band o2 (LSU 4.9 (?))
Bosch (0 221 503 407) wasted spark coil
Bosch IAC (pwm drive, with low voltage flyback)
115kPa MAP sensor
No EGT
Fire order: 1-3-4-2
High-Z injectors with high voltage flyback
Car modifications so far:
- Lexmaul ram induction
- Lexmaul exhaust system
- New pristons, valves, etc
- Increased static CR to 11,5
- 272° camshaft
- 440 cc Bosch injectors
- Lightened flywheel
- 6 gear gearbox
Config: (please check them)
MembersPage/RufolfFeher/TriggerSetup
MembersPage/RufolfFeher/IdleAirSetup
MembersPage/RufolfFeher/IgnitionSetup
MembersPage/RufolfFeher/InjectionSetup
MembersPage/RufolfFeher/OxygenSensor
MembersPage/RufolfFeher/Wiring
Future TODO:
To get the car run as it should :)