VEMS v3.3 running 1.0.73 fw (serial nr: 1776)
It will be built in using the original wires and sensors.
About the engine:
Primary trigger: missing tooth, 60-2, bosch VR sensor (polarity checked)
Secondary trigger: hall (not used yet)
Knock sensing will be used later
Narrow band o2
One coil with distributor
Bosch IAC (pwm drive, with low voltage flyback)
115kPa MAP sensor
No EGT
Fire order: 1-3-4-2
High-Z injectors with high voltage flyback
Car modifications so far:
- Lexmaul ram induction
- Lexmaul exhaust system
- New pristons, valves, etc
- Increased static CR to 11,5
- 272° camshaft
- 440 cc Bosch injectors
- Lightened flywheel
- 6 gear gearbox
Config: (please check them)
MembersPage/RufolfFeher/TriggerSetup
MembersPage/RufolfFeher/IdleAirSetup
MembersPage/RufolfFeher/IgnitionSetup
MembersPage/RufolfFeher/InjectionSetup
MembersPage/RufolfFeher/OxygenSensor
MembersPage/RufolfFeher/Wiring
Future TODO:
Change nbo2 to wbo2
Throw out the distributor, and replace with wasted spark coils or COP