VEMS v3.3 running 1.0.73 fw
It will be built in using the original wires and sensors.
About the engine:
Primary trigger: missing tooth, 60-2, bosch VR sensor (polarity checked)
Secondary trigger: hall (not used yet)
Knock sensing will be used later
Narrow band o2 (help needed with this)
One coil with distributor
115kPa MAP sensor
No EGT
Fire order: 1-3-4-2
440cc high-Z injectors with high voltage flyback
Config:
MembersPage/RufolfFeher/IgnitionSetup
MembersPage/RufolfFeher/InjectionSetup
Future TODO:
Change nbo2 to wbo2
Throw out the distributor, and replace with wasted spark coils or COP
Questions:
--How to set up the NBO2?
Config taken from here: http://www.vems.hu/manual/html/ch09s07.html but on test bench MT reads (fast changing) random voltage (0-5V). It does not matter whether the sensor is connected or not.
When I changed the Setting-Constants to WB in MT, it stuck at 0V.