After the FirstProblem is solved I want to log my Ignition to get an Idea how much Advance vs. boost i have. Do i need to populate the second LM1815 Chip? I want to log the Ignition in the car, because my Ignition have two triggers (first one every 180deg on TDC Cyl. 1+4 and on TDC Cyl. 2+3, second one 122teeth per revolution at the Starter gear). Is it right that i need a cable from the Coil Pin 1 to the input of the second trigger?
In my_make:
LOG_ALIEN ?
SEND_DWELL_NOT_IAC ?
CAPTURE_ALIEN_ECU O.K.
MS_COMPATIBILITY NOT defined O.K.
MSNS NOT defined O.K.
See my notes on OnlineCourse/AlienIgnitionLogging
In global.h i found for trigger2:
bit0 0:falling/1:rising,
bit1 0:enable/1:disable,
bit2 0:no filtering/1:filtering,
bit3 0:toothwheel/1:coil,
bit4 0:alien advance/1:cam sync,
bit5 0:single edge/1:both edges when cranking
so i think config.secondary_trigger=13 ?
The most frustrating work for a newbie is Sensor calibrating.
I changed the gentherm2 utility for my needs. You put the three temp-resistance Pairs in and get a hex file out with which you can patch vems.hex. I put my Sensor calibration Data and this program into files/MembersPage/OffnerRobert/Sensors.
I found a little Problem with hexpatch and my VDO cltfactor file:
- snip#
NOTE: hexfile line neglected:
ERROR: not a hexa digit: a
ERROR: not a hexa digit: b
ERROR: not a hexa digit: c
ERROR: not a hexa digit: d
ERROR: not a hexa digit: e
ERROR: not a hexa digit: f
NOTE: hexfile line neglected: :020000020000FC
replaced (idx=1f) to: :1003f0002D2A282624211E1B1814100C060000008C
replaced (idx=20) to: :10030000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD
replaced (idx=21) to: :10031000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFCF1
replaced (idx=22) to: :10032000F9F7F5F3F1EFEDEBEAE8E6E4E3E1E0DE1F
replaced (idx=23) to: :10033000DDDBDAD8D7D6D4D3D2D0CFCECDCCCAC994
replaced (idx=24) to: :10034000C8C7C6C5C4C3C2C1C0BFBEBDBCBBBAB9A5
replaced (idx=25) to: :10035000B8B7B6B5B4B3B2B2B1B0AFAEADACACAB8A
replaced (idx=26) to: :10036000AAA9A8A8A7A6A5A4A4A3A2A1A1A09F9E4C
replaced (idx=27) to: :100370009D9D9C9B9B9A99989897969595949393FD
replaced (idx=28) to: :10038000929190908F8E8E8D8C8C8B8A89898887A4
replaced (idx=29) to: :1003900087868585848383828180807F7E7E7D7C45
stats: 11 lines replaced (6053 remained)
- snip#
Maybe somebody knows why this is?
If I patch the vems.hex with hexedit - no problem.
Hope it helps.