VEMS Round with Motronic 7.1
VEMS Round using the following input:
- WBO2
- EGT
- Analog 1 --> 10 bar oil pressure sensor
- Analog 2 --> 400kPa VEMS Map sensor
- Apparently there is no way to display *BOTH* analog outputs on the display. I would like to see both boost and oil pressure on the slots.
- Very outdated information. If you need to display both analog inputs on the round display at the same time, just use the latest round fw (and in VT Preferences, update ini files from web, of course) and [read VT help]. Support for ANALOG2 on display was added a long time ago.
Outputs:
- PWM0 -> reference RPM drive warning led for shiftlight
- PWM4 -> reference RPM drive "shift-now" led for shiftlight
Both PWMs should reference RPM and start sending PWM signal to the respective leds when reached the configured RPM.
Either needs a new target method for both PWM outputs or a hackish way is to configure an unreachable EGT or lambda target.
Sounds like a crap solution.
- Linear wideband output is connected to Motronic 7.1 for data-logging. (This Motronic ECU is dual-narrowband with dual EGTs for mixture preparation.)
- RPM input is coming from the Motronic RPM signal (instrument cluster), can this even be configured or do we need a crank signal?! If that's the case the documentation (Help) should be change to state something other than "RPM Signal".