PLEASE collect real vemslog and triggerlog here...
Make sure
- to try and report with vemscfg in which
- config matches the configlet on MembersPage/Suzuki36-2-2,
- except secignore=01 for the new campulse-train.
- secondary_trigger=58 falling edge is OK instead of 59 (rising edge)
Sectrig disabled
- This should be a last resort, with number of teeth on wheel=12 instead of 24, and the trigger tooth sequence is 0 6 0 6 .... instead of 0 18 12 6 0 18 12 6 (decimal, traversed backwards ).
The number of sectrig campulses inside the tooth-runs matches the generated signals (exact campulse length and position does not matter):
