| [ Start] | [Questions ] | [ Injector] | [Ignition] | [Trigger] | [Display] | [Wbo] | [Config] | [Tables ] | [Idle] |
Trigger data
Primary triggering:
Currently using the stock Peugeot triggering. It uses a 60-2 flywheel. The first tooth after the missing tooth is at TDC.
Config:
primary_trigger=00
secondary_trigger=02
tooth_wheel=3A
trigger_tooth=02
another_trigger_tooth=1E # Is this correct?
crank_minper=EA # Is this correct?
tooth_wheel_twidth1=02
tooth_wheel_twidth2=06
The sensor wire is shielded, however the new loom has no shielding yet. In the future this will be changed but for now it is interesting for me to see how it will work without shielding.
Secondary trigger:
Currently the engine does not have a secondary trigger. I will therefor run batch injection and wasted spark. After I know the ins and outs of this setup i will use a secondary trigger for sequential injection and coil on plug for better control.
I think a VR sensor is easiest to apply. More about that later.