The engine:
Hello! I install V3 onto an engine like this, that a bmw E30 body I am building. I checked it that the engine works similarly, than the 6 cylinder ones engines, but the right, and the pistons are not on left side simultaneously high. 60-2 vr are primer triggers on the crankshaft.Does somebody have an experience with an engine like this?
- gunni-
Are you saying that the pistons are not TDC in pairs for this engine.
If they are then you can run the 60-2 trigger wheel and run 6 ignition outputs to wasted spark coils so to trigger the appropriate pairs. Injectors could be wires similarly.
Then you shouldn´t have any issues tuning the engine.
/gunni
Yeah! When it is the left side, 1 and 6 pistons tdc, there is not tdc on the right side then one of the pistons. 1-1 distributor is on both sides, and 1-1 coil. I check how many deg is an offset is between the two sides.
- Gunni -
As long as there is a pair at TDC on each bank it doesn´t really matter. As that´s what´s important to get correct ignition timing on all cylinders.
I think it would be ideal if you create a 360deg chart that shows what pistons are together at TDC, and with that chart is a picture of how you have numbered the cylinders.
/gunni