Rob Humphris - Cambridge, UK.
[VEMS UK & Eire Forum]
http://www.vems.co.uk
MembersPage/PhatBob/RoundSupportProblems
Table Editor
Some more development on the Table Editor, which is still very much in Alpha and effectively non-functional (no ECU interaction).
- Ctrl-L allows editing of the load table.
- Ctrl-R allows RPM table editing.
- Ctrl-C copies the content of the selected cell.
- Ctrl-V pastes the copy into the selected cell or group of cells.
- F9 changes to VE table.
- 10 changes to Ignition table.
- 11 changes to Lambda table.
- Select a group of cells in the main table:
- Page Up to increase the cells' value.
- Page Dn to decrease the cells' value.
- Type a numeric value to set the selected cell's
- Bounds checking for keyed entry (0-255 for VE, xx.(25|50|75) for ignition, 0.7->1.x for lambda) Lambda does not scale correctly - please advise
- Small increment with q|+|Pg Up
- Small decrement with w|-|Pg Dn
- Large increment with e|Ctrl +|Ctrl Pg Up
- Large decrement with r|Ctrl -|Ctrl Pg Dn
- Paint value - Ctrl Up, Down, Left, Right
Features to come (Please feel free to add requested features):
- Read/write tables from VEMS
- Read/write tables from File.
An attempt to describe the Priming, Cranking and Afterstart
Icons for v3gui
- nice job, Rob, thanx !
- Do you have them in other (editable) format ? What tool do you use ?
MembersPage/PhatBob/UserGuide
MembersPage/PhatBob/InstallationDevelopments
MembersPage/PhatBob/ToyotaFitting
MembersPage/PhatBob/Installations/MattJ - Toyota Corolla 4A-GZE Twin turbo.
MembersPage/PhatBob/WBO2Settings
MembersPage/PhatBob/ToyoyaIACPatch
MembersPage/PhatBob/ALSConfigFix
MembersPage/PhatBob/RoundOperationQuestions
MembersPage/PhatBob/InjectorNotes
0,2,5,12,23,35,53,75,115,165,225,255
MembersPage/PhatBob/ConfigsTables
Software
First cut (pre-alpha) attempt of a new set of gauges for the Wideband software.
http://vems.hu/www.vems.co.uk/VEMSWB/DialExample.zip
UsabiLity/GenBoard/WinTools (With known working megaloader, makeconfig etc)
Documents & Reports
http://vems.hu/www.vems.co.uk/VEMSLoom/LoomGuideUnitNNN.doc
This document is designed to be supplied in printed format to customer who are buying pre-configured VEMS and Looms/Harness Adaptors.
MembersPage/PhatBob/FieldReport - Observations from a Professional Calibration Engineer
MembersPage/PhatBob/BoostControl - Working out the correct connection and configuration for the webshop pneumatic valve.
WebshopIgnitionOptions - explains the webshop ignition coil options
http://www.autoserve.8m.com/OBD2ab1.html
http://forum.pgmfi.org/viewtopic.php?t=2005&highlight=crimping
ODB2 DLI Connectors connectors
16 pin ("10764" on connector) 174514
22 pin ("10765" on connector) 174515
26 pin ("10763" on connector) 174516
The BLACK ECU side connector: 172023-2
http://catalog.tycoelectronics.com/TE/bin/TE.Connect?C=1&M=BYPN&PID=46076&PN=1-172023-2&I=13
Plug: 172021
=========================================================================================
DLI Connector Range
As requested on AFreshTiny page.
AFreshTiny 5A control.
It would be good if the 5A control could be activated in a similar way to the Genboard Misc outputs.
Trigger on/off on:
- Lambda - so that the system can turn on a 5th injector or warning light.
- EGT - to trigger water injection, 5th injector, turn off boost solanoid or trigger a warning light)
- Analog Input - to set on off points with either boost or tps - would work well as a 'soft' TPS switch to turn on n2o systems or any of the above suggestions.
Compulsory
MembersPage/PhatBob/PurchasePage
Previous Problems Worth Remembering
MembersPage/PhatBob/MagnettiMarelliSensorProblem
Handy URLs
A list of Ecu Sensors and their functions
http://www.pgmfi.org/twiki/bin/view/Library/EcuSensors
A fairly good list of Japanese car's ECU pin outs
http://www.plxdevices.com/ecudatabase.htm
USB to RS232 converter chips