Members Page/Phat Bob - VEMS wiki www.vems.hu

MembersPage/PhatBob (2015-01-01 07:00:00)

Rob Humphris - Cambridge, UK.

MegaTune shows 0.75degrees advance even when cranking with these config and tables files:

note that only the boards without the AVCC mod use the _287 files. The rest use files which end with _256

MembersPage/PhatBob/BoostControl - Working out the correct connection and configuration for the webshop pneumatic valve.

WebshopIgnitionOptions - explains the webshop ignition coil options

As requested on AFreshTiny page.

AFreshTiny 5A control.

It would be good if the 5A control could be activated in a similar way to the Genboard Misc outputs.

Trigger on/off on:

Lambda - so that the system can turn on a 5th injector or warning light.
EGT - to trigger water injection, 5th injector, turn off boost solanoid or trigger a warning light)
Analog Input - to set on off points with either boost or tps - would work well as a 'soft' TPS switch to turn on n2o systems or any of the above suggestions.

Currently Developing

Working on a specific start-up guide for customers who've had their VEMS installed or bought a wiring loom