Rob Humphris - Cambridge, UK.
MembersPage/PhatBob/UserGuide
MembersPage/PhatBob/InstallationDevelopments
but to select alpha-n just set hybrid_rpma = hybrid_rpm_m = ff
normally for alpha-n map mult is off
to have speed-d everywhere set hybrid_rpma = hybrid_rpm_m = 00 and map-mult on
but you can use alpha-n with map mult too
pulsewidth is scaled according to map value
so ve(tps/rpm) * map
without map mult its ve(tps/rpm) * magic_constant
magic_constant to scale to realworld units
http://www.not2fast.com/efi/blendingMAPnTPS.shtml
(tps/rpm) * map is the ferrari f40 algorithm
we can do all except .4 (1, 2, 3)
<phatBob_> we need a definative list of numbers to use for dt/dv
<Jorgen1_> I use: 1,5,20,40
New Project Work
MembersPage/PhatBob/Installations/MattJ - Toyota Corolla 4A-GZE Twin turbo.
MembersPage/PhatBob/FieldReport - Observations from a Professional Calibration Engineer
Updated Project Work
http://vems.hu/www.vems.co.uk/VEMSLoom/LoomGuideUnitNNN.doc
This document is designed to be supplied in printed format to customer who are buying pre-configured VEMS and Looms/Harness Adaptors.
MembersPage/PhatBob/ALSConfigFix
Recent Project Work
MembersPage/PhatBob/ToyoyaIACPatch
MembersPage/PhatBob/ToyotaFitting
MembersPage/PhatBob/InjectorNotes
UsabiLity/GenBoard/WinTools (With known working megaloader, makeconfig etc)
Problem
I have taken back a customer's ECU number 328 to sort the Aref issue. I've upgraded to 1.0.53 and even with the ALS settings fixed I see that the ALS Switch On is showing in MT and the spark advance is showing -0.75degrees.
Q Can anyone suggest a solution please?
A In post 1.0.46 versions ALS and launch inputs are configurable, set als_launch_input=FF for original behaviour, see GenBoard/UnderDevelopment/FirmwareChanges (since 1.0.46) for details.
http://vems.hu/www.vems.co.uk/VEMSInstalls/Simon86/config328.txt
http://vems.hu/www.vems.co.uk/VEMSInstalls/Simon86/tables328.txt
Emils answer:, got offline while writing, so someone else got in before me, but i'll post anyway.
2 problems
- spark advance is constantly -0.75
- You have configured ign_balance = FF , which automatically limits advance to maximum -0.75, Change that to setting = 00 instead, for full advance range
- Megatune: Extras, Advanced ALS, Ignition offset (or similar), mid page.
- ALS Switch On
- Is it wired up at all? make sure als_launch_input = FF, you have ... = F0 , these other channels require a pullup to be inactive, where the old channels SDA + SDL or something have internal pullup.
- Megatune: Select "old" settings in both Advanced ALS and Launch control menus, both under "Extras" dropdown menu.
- This has also been a indication for me that something is wrong with grounding, where the ECU experience a brownout during powerup, that is with 6 or more 2 ohm injectors. Please report back here for further analysis if the config changes doesnt help, im pretty sure these problems are config related in your case
Notes to self
http://www.vems.hu/wiki/index.php?page=EasyTherm
note that only the boards without the AVCC mod use the _287 files. The rest use files which end with _256
MembersPage/PhatBob/BoostControl - Working out the correct connection and configuration for the webshop pneumatic valve.
WebshopIgnitionOptions - explains the webshop ignition coil options
http://www.autoserve.8m.com/OBD2ab1.html
http://forum.pgmfi.org/viewtopic.php?t=2005&highlight=crimping
ODB2 DLI Connectors connectors
16 pin ("10764" on connector) 174514
22 pin ("10765" on connector) 174515
26 pin ("10763" on connector) 174516
The BLACK ECU side connector: 172023-2
http://catalog.tycoelectronics.com/TE/bin/TE.Connect?C=1&M=BYPN&PID=46076&PN=1-172023-2&I=13
Plug: 172021
=========================================================================================
DLI Connector Range
As requested on AFreshTiny page.
AFreshTiny 5A control.
It would be good if the 5A control could be activated in a similar way to the Genboard Misc outputs.
Trigger on/off on:
- Lambda - so that the system can turn on a 5th injector or warning light.
- EGT - to trigger water injection, 5th injector, turn off boost solanoid or trigger a warning light)
- Analog Input - to set on off points with either boost or tps - would work well as a 'soft' TPS switch to turn on n2o systems or any of the above suggestions.
Compulsory
MembersPage/PhatBob/PurchasePage
Previous Problems Worth Remembering
MembersPage/PhatBob/MagnettiMarelliSensorProblem
Handy URLs
A list of Ecu Sensors and their functions
http://www.pgmfi.org/twiki/bin/view/Library/EcuSensors
A fairly good list of Japanese car's ECU pin outs
http://www.plxdevices.com/ecudatabase.htm
USB to RS232 converter chips