- Need help for setting up 36-1 trigger
Edge = rising
Type = multitooth
Filtering = Disabled
TDC after the trigger (vr sensor) deg =??
Number of teeth on the wheel = 35
36-1
Trigger tooth = 1
Number one tooth after the missing one
Next Trigger tooth = 18
Crank min period usec = 3000 (assuming a 4cyl that is 6000usec for a whole crank rotation, which is 10000 RPM)
- reset_engphase_after=decimal 216 (which is an arbitrary number for 720 crankdegrees, practical for 36 tooth wheel). The values below are in the same unit:
- Angular width of tooth = 3 (10 degrees)
- Angular width of missing tooth = 6 (20 degrees)
PeterJensen/trigger/beslag_1.jpg
PeterJensen/trigger/beslag_2.jpg
How do you mount the HALL sensor? It's a HALL sensor in a shatter-arrangement, right?