Help needed.
Car Dodge Viper 10 cylindre ODD FIRE
Could be Thorbjorn Engdahl that made this car.
http://www.vems.hu/wiki/index.php?page=MembersPage%2FThorbjornEngdahl%2FVIPER
Can Vems control this car specially thinking of ignition.
The car is running but do not sound well. also burned a engine early this year.
Car is now running wasted spark
Config
Hello Peter,
Yes Dodge Viper v10 is fully supported using the stock ignition system (which is indeed wasted spark).
Best regards, Dave
- can any body verify the config Peter did upload.
the firing is not accurate on some cylinders! i think the ignition setup.
Best regards
Troels
Hello Peter/Troels,
I have reviewed your config "viper_v3.3_u011200-A-2018.10.26-16.49.23.vemscfg" and there are indeed some ignition configuration problems there; To avoid any unneeded verification (or confusion) please apply the setup from configlet "Dodge_Viper_V10_10+4_Camsync".
If you upgrade the firmware to 1.2.38 (latest stable), wire the coils as follows (also included in configlet txt):
- ec36, pin 33 (10) = cyl 1 + 6
- ec36, pin 34 (20) = cyl 5 + 10
- ec36, pin 35 (00) = cyl 8 + 9
- ec36, pin 36 (30) = cyl 4 + 7
- ec36, pin 24 (60) = cyl 2 + 3
You'll have confirmed good starting point from which to continue.
I hope this helps; if there are any further questions, feel free to ask.
Best regards, Dave
http://www.vems.hu/files/PeterJensen/v10%20starts.vemscfg