Hi
Need help to get this “nice” jap trigger working
Car Toyota
Engine blacktop
Cas distributor 4 spots on shaft
Problem:
When setting up ignition to 17 degrees BTDC at 1000 rpm its only 7 degrees at 5-6000 rpm so its sliding almost 10 degrees.
We have tested spark table at 17 and 27 degrees and it slide near 10 degrees.
Triggerlog 1 17 degrees
Triggerlog 2 27 degrees
Config/log
http://www.vems.hu/files/MembersPage/PeterJensen/toyota/v3.3_n004171-2012.09.21-20.31.33.
I have seen this problem long time ago but due not remember what cores the behave.
Thanks Peter