Mitsubishi 6g72 6 cyl.
Q: do we support this trigger http://www.msextra.com/doc/ms2extra/MS2-Extra_Mits6g72.htm
A: The crank pattern is fully supported, typical coil type, but for cam sensor right now i would recommend to cut 3 teeth off and use it as a single pulse cam sync
- witch tooth’s to remove and what tooth to leave?
Q: will invert logic level work on this ign endstage http://www.seekic.com/circuit_diagram/Automotive_Circuit/ChangFeng_LieBao_SUV_6G72_engine_ignition_system_circuit.html
A: I cannot see the reason for the center box, that can enable or disable ignition, I would personally bypass this and hook normal IGBT outputs straight to the actual coil.
- It could be nice if we could get the oem endstage to work, it will save a lot of time and good support for anyone else.
/Peter
