Testing firmware 1.2.15 Knock
Car: Hyundai 1.6 16v
Wasted spark
60-2 no cam
Knock seams to work nice, I can hear the engine knocking and see the spikes in Vt.
Issue.
1: When loading 1.2.15 I have to reduce req. fuel from 16 to 12 ms
2: Also I have to type in big numbers for Fuel cut and fuel resume (20000 and 19000) this function act like rpm limiter now so something Is wrong her.
3: If playing with knock sensor 1 and 2 it will effect the lambda value somehow. Sensor like 1-1-1-1 is good 1-1-1-2 will make lambda go bad. (nothing connected to knock input 2)
4: Gauge of lambda target is not showing the correct value of the lambda table.
3 log files to look at.
The car is not tuned well cores of the hack I made to get this firmware to work at all
http://www.vems.hu/files/MembersPage/PeterJensen/Hyundai/v3.3_u004815-2013.08.25-11.51.55.vemslog
http://www.vems.hu/files/MembersPage/PeterJensen/Hyundai/v3.3_u004815-2013.08.25-12.15.31.vemslog
http://www.vems.hu/files/MembersPage/PeterJensen/Hyundai/v3.3_u004815-2013.08.25-12.27.23.vemslog