General Questions
Haw to connect flex fuel sensor to pcb 3.8
ECU 9952
What do I have change to make this 3.8 pcb to work with a flex fuel sensor.
We need to connect to port SCL so is this protected and can we connect and do nothing more?
Also normally wheel speed 2 is wired to EC36 pin 30 but this pin is trased to p259 so do I have to cut that trace and wire SCL to EC36 pin 30 directly?
Thank you
BMW 88 pin Boost valve
We need to connect a N75 boost valve to this 88 pin ecu but what pin will we connect to?
Econoseal 10 pin connector
Pin 8 and 9 Extra output with flyback.
- What does it mean ? (p259 or inj-FET or what ?)
- exactly as written, same as in VemsTune
- so in VemsTune, outputs menu select boost control and choose
- Extra output 5 if you connected to "Extra output 5"
- Extra output 6 if you connected to "Extra output 6"
Round only AIM
Hi
Setting up aim coolant temperature something goes wrong while temp goes form 99 to 100 degrees. Should be 100 but at the display i can see number 180. I have used the predefined values and working great until it gets to 100 degrees.
Firmware version 0.5.3